Phrozen’s Aqua 3D Printer Resins are developed to print with speed, producing 3D printed models with high-precision and durable 3D printed parts that do not break easily.

Phrozen provides a wide range of resins that can be used for a variety of purposes. Please refer to this link to decide which resin is best suited for your needs.

SPECIFICATIONS:

Aqua Green

Density: 1.12 g / cm3

Viscosity: 125 CPS

Tensile Strength (Break): 24 Mpa

Elongation: 21%

I-Zod Impact Strength: 1.81 KJ/m2

Surface Hardness, Shore D: 86 Shore D

Water Contact Angle: 55 degree

PRECAUTIONS:

• Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year